In industry and commerce, one-third of electric motors use Belt Drives. However, some customers cannot take advantage of the potential energy cost savings of certain industrial belts because these costs are easily available and cost-effective.

Here is the V-Belt Supplier to show you how to choose the correct V-BeltThe selected model should be compatible with the selected V-belt, otherwise the V-belt will be abnormal in the pulley groove. When changing to the V-belt.

Function of car beltAutomobile belts are also called automobile transmission belts. Its main function is power transmission. The transmission belt on the car is responsible for driving the movement of all parts. If it breaks, the car won't move.Classification of car beltsThere are three common belts

The development history of the V belt1. In 1917, John Gates invented the world's first V-belt, and invented a V-shaped rubber belt with cotton rope as the skeleton and fabric reinforced, making Gates the world's largest manufacturer of V-belts. enterprise.2. In 1996, Gates Rubber Company became a wh

Incorrect installation and maintenance methods of agricultural machine v-belt will not only increase the damage to the belt and bearings, but also affect the transmission efficiency. How to correctly select, use and maintain the v-belt?

Here we agriculture v-belt manufacturer share with you the characteristics of work process, to help you know better of the v-belt drive principle.Power transmission capacityAs with all mechanical drives, the basic purpose of a belt drive is to transfer motion and power from one shaft to another.

In 1917, the first rubber V belt was born. From this time on, the v-belts became standardized through trade and manufacturing associations. During the same period, the types and models of V belts were expanded to accommodate a wider range of applications.

With the arrival of the busy harvest season, many people started to prepare for the harvest and also started to stock up, one of which is the v-belt, one of the farm machinery accessories.

At present, industrial belts are widely used, from large to industrial mines, enterprises, ships, small to daily tricycles, tractors, etc., as long as the transmission of industrial devices, most of them need belts to transmit power.

The V-belt appears to be a relatively benign and simple device. They’re basically a glorious rubber band, right? Do you need to replace it? Just measure the top width and circumference, find another belt with the same size, and place it in the drive. There’s just one problem: this approach is the bi