Views: 2 Author: Site Editor Publish Time: 2024-01-05 Origin: Site
Multi-wedge belt in the use of the process will encounter some problems, for professional people, these problems are solved, and for non-professionals, this is very distressed, next, boshuo rubber for you to talk about the problem and the corresponding solution!
Problem 1: Abnormal wear
reason | Adjustment measure |
The pulley is not coplanar | Adjust pulley inclination to ensure pulley alignment |
Belt wheel roughness is too large | Use roughness qualified pulley |
The belt wheel is rusty or has foreign objects stuck in it | Clean the pulley surface and install a shield for the pulley |
Belt slip | Low installation tension: increase the installation tension appropriately |
Problem 2: Primer cracking
Belt slip | Low installation tension: increase the installation tension appropriately |
The wheel train is not working well | Check the pulley, check the pulley has unbiased shaft, stuck |
The belt is in oil, water, high temperature, low temperature, ozone and other environments for a long time | Belt regular maintenance, clean up oil, water stains; Check that the pulley is running without bias shaft and stuck |
These are some of the problems and solutions that author knows, I hope to help you!