Strongly Acidic Cation Exchange Resins

Resins with sulfonic acids as their functional groups, are called strongly acidic cation exchange resins, since their acidity is strong as hydrochloric acid or sulfuric acid.

GEL type BS SK Series

BS1B resin is our “flagship” premium grade, gel-type, strong acid cation resin. It has excellent properties for industrial applications and is recommended for industrial scale softening and demineralization applications. It has standard crosslinkage. In situations where the raw water contains oxidizing substances, the higher crosslinkage resins such as BS110 and BS112 are recommended to provide better performance and longer operating life. BS110 is also recommended for regenerable mixed bed applications.

BS104H has low (4%) crosslinkage. It is mainly used as a catalyst and special applications where low crosslinked density is necessary to allow penetration of large organic molecules,or where a faster reaction rate is required.
Grade Name SK104H SK1B SK110 SK112
Chemical Structure
Ionic Form As Shipped H-form Na-form
Whole Bead Count 90 min.
Shipping Density
(g/L: approx.)
750 830 845 855
Salt Spliting Capacity
(meq/mL-R)
1.1 min. 2.0 min. 2.0 min. 2.1 min.
Water Content
(%)
62 - 72 43 - 50 35 - 45 32 - 42
Particle Size Distribution
on 1180 μm (%)
through 300 μm (%)
5 max.
1 max.
Effective Size (mm) 0.40 min.
Uniformity Coefficient 1.6 max.
Ionic Form Conversion H Form 95 min
Operating Temperature (℃) 120 (H-form, Na-form) max.
Crosslinkage (%) Ca. 4 Ca. 8 Ca. 10 Ca. 12

Porous type BS PK Series

The PK resin grades are based on a porous styrene DVB polymer matrix. Their porous structure provides excellent durability against osmotic shock by swelling and shrinkage. PK216 is recommended for general water treament. PK228 is recommended for condensate demineralization (L grade is recommended for best pressure flow performance). PK grades are also recommended for special applications such as deashing, decolorization, and as a catalyst (as they have higher reaction rate in organic solvents than gel-type resins).

Highly Porous type BS RCP 160M

RCP160M has higher porous properties than PK series, and has a measurable surface area. It is generally used for special process applications such as non-aqueuos catalic reaction or cation removal from non-porlar solvent.
Grade Name PK208 PK212L PK216 PK220 PK228 RCP160M
Chemical Structure
Ionic Form As Shipped Na-form H-form
Shipping Density
(g/L: approx.)
765 780 785 795 810 745
Salt Spliting Capacity
(meq/mL-R)
1.2 min. 1.5 min. 1.75 min. 1.9 min. 2.05 min. 1.5 min.
Water Content
(%)
58 - 68 52 - 58 46 - 52 41 - 47 37 - 43 45 - 55
Particle Size Distribution
on 1180 μm (%)
through 425 μm (%)
through 300 μm (%)
5 max.

1 max.
5 max.
1 max.
5 max.

1 max.
on 710 μm
25% max
Effective Size (mm) 0.40 min. 0.45 min 0.40 min.
Uniformity Coefficient 1.6 max.
Ionic Form Conversion H Form 97 min.
Operating Temperature (℃) 120 (H-form, Na-form) max.
Crosslinkage (%) Ca. 4 Ca. 6 Ca. 8 Ca. 10 Ca. 14

GEL type BS UBK500 Series

Chromatographical separation is widely industrialized in pharmaceuticals, fermentation and food fields. Ion exchange resins of small particles with uniform particle size distribution are applied for these purposes. The smaller particles with the more uniform particle size distribution, the higher yields and purities can be obtained. BS UBK500 series are typical cation exchange resins of this type.
Grade Name UBK530 UBK550 UBK535 UBK555
Chemical Structure
Ionic Form As Shipped Na-form Ca-form
Whole Bead Count 95 min.
Shipping Density
(g/L: approx.)
825 850 840 865
Salt Spliting Capacity
(meq/mL-R)
1.6 min. 1.8 min. 1.6 min. 2.0 min.
Water Content
(%)
52 - 55.5 46 - 49.5 47 - 51 42 - 46
Particle Size 200-240μm
85% min.
190-240μm
90% min. 85% min.
Ionic Form Conversion Ca Form 98 min
Operating Temperature (℃) 120 max.
 

Gel Type Uniform Particle Size Ion Exchange Resins

Ion exchange resins with good uniformity in particle size ncrease their necessity to reduce the reagents costs and spent waste waters in manufacturing pure waters. They are also used in other fields because they have little amount of large particles easy to be broken by swelling and shrinkage. Gel type ion exchange resins of uniform particle size are now launnched to meet such necessity.
UBK16 has high (16%) crosslinkage. It is used for special process application such as purification of pharmaceuticals.
Grade Name UBK08 UBK10 UBK12 UBK16
Chemical Structure
Ionic Form As Shipped Na-form
Whole Bead Count 90 min.
Shipping Density
(g/L: approx.)
840 850 855 865
Salt Spliting Capacity
(meq/mL-R)
2.0 min. 2.2 min. 2.3 min. 2.3 min.
Water Content
(%)
43 - 49 38 - 44 33 - 39 27 - 37
Average Diameter (μm) 600 ± 50 650 ± 50 600 ± 50
Uniformity Coefficient 1.1 max. 1.2 max.
Operating Temperature (℃) 120 (H-form, Na-form) max.
Crosslinkage (%) Ca. 8 Ca. 10 Ca. 12 Ca. 16

Please contact us for further information

Contact